Image 1 of 13
Image 2 of 13
Image 3 of 13
Image 4 of 13
Image 5 of 13
Image 6 of 13
Image 7 of 13
Image 8 of 13
Image 9 of 13
Image 10 of 13
Image 11 of 13
Image 12 of 13
Image 13 of 13
FEVI Sabix 8 & Airmec TTS 34110/900 Sandblasting Package
-
Adjustable blasting pressure for controlled cleaning and surface preparation.
Compact 8-litre blast pot with a wheeled base.
Remote-control blasting gun with adjustable abrasive delivery.
Petrol-powered compressor with electric start.
Twin air receivers providing 34 litres of combined storage.
Pneumatic compressor wheels and removable handles for positioning around site.
Condensate separator to help reduce moisture-related abrasive blockages.
UK advice, finance options and ongoing support through CoolBlast.
-
FEVI Sabix 8 Base sandblasting machine, complete with blasting gun, 3 mm tungsten carbide nozzle, 5-metre blasting hose and remote control.
Airmec TTS 34110/900 portable petrol compressor, with electric start and twin air receivers.
10-metre compressed air supply hose.
Condensate separator filter with filter cartridge – removes condensed water and particles from the compressed air supply, helping prevent abrasive clogging and maintain consistent blasting performance.
RC4 sandblasting respirator mask – lightweight design with a shoulder-length protective hood, replaceable scratch-resistant visor and twin dust filters.
One replacement RC4 filter.
Abrasive media supplied separately.
-
Sabix 8 VR Upgrade
Choose the VR version for greater control when using very fine abrasives. It adds a pneumatic tank vibrator and precision pneumatic abrasive mixing system, making it particularly useful for detailed restoration and microblasting.
Acquablast Humidification Kit
Introduces a controlled amount of water into the blasting stream to reduce airborne dust and improve visibility. A useful addition for restoration, site work and surface preparation where dust reduction is a priority.
-
Paint and coating removal from suitable timber and beams.
Controlled cleaning of stone, brickwork and masonry.
Rust removal and preparation of metal components.
Furniture, doors and architectural restoration.
Localised cleaning and detailed surface preparation.
-
The SABIX 8 can be used with a wide range of fine blasting media, making it suitable for everything from delicate restoration to more aggressive cleaning.
Crushed glass – general rust, paint and coating removal
Sodium bicarbonate – delicate cleaning, aluminium and automotive components
Corn cob – timber, beams, furniture and sensitive restoration work
Nut shell – carbon removal, engines, moulds and delicate surfaces
Olivine – heavier rust, coatings, steel, stone and concrete
Garnet – aggressive rust and coating removal
Glass bead – cleaning and satin finishing of aluminium and stainless steel
Aluminium oxide – more aggressive cleaning and surface preparation
The best abrasive will depend on the surface, coating and finish required. CoolBlast can advise on the most suitable media for your application.
-
FEVI Sabix 8
Abrasive capacity: 8 litres.
Operating pressure: 0.5–7.8 bar.
Air consumption: approximately 550 litres/minute / 19.4 CFM at 7 bar.
Nozzle: 3 × 60 mm divergent tungsten carbide.
Blasting hose: 5 metres.
Weight: 25 kg.
Airmec TTS 34110/900
Compressor type: two-stage, twin-cylinder piston.
Published airflow: 900 litres/minute / approximately 31.8 CFM.
Maximum pressure: 11 bar.
Engine: four-stroke petrol.
Starting: electric start with battery.
Receiver capacity: 2 × 17 litres.
Weight: 167 kg.
Dimensions: 1,150 × 751 × 1,070 mm.
-
