POST-HARVEST MACHINERY MAINTENANCE
Professional blasting equipment for post-harvest machinery maintenance, restoration and repaint preparation.
✔ Remove rust, corrosion, paint & old coatings
✔ Wet or dry abrasive blasting options
✔ Dust suppression with wet blasting
✔ Options for light maintenance through to heavy restoration
✔ Portable compressors correctly sized for blasting
✔ UK support, delivery & finance available
Popular Blasters
Leasing available
The ultimate dual-purpose blasting machine — switch between wet blasting and dry blasting at the push of a button.
Power Rating: ⭐⭐⭐⭐⭐
Airflow Required: Optimised at 175 CFM, with a minimum requirement of 90 CFM.
Blasting Coverage: Up to 10 m² per hour when operated at 175 CFM.
Media Consumption: Approx. 75 kg per hour at 175 CFM airflow.
Blasting Time: Approx. 40 minutes continuous blast time
Buyers Guides: Read our handy guides on vapour blasting machines and compressors
The Applied Aquablaster Xtreme 100 is a game-changing vapour blasting machine designed for maximum flexibility. Built on the success of the Applied Classic range, this innovative sand blasting machine can transform instantly from dry blasting to wet blasting, making it ideal for contractors and restoration specialists who need both options in a single unit.
In wet blasting mode, the reduced heat and friction make it perfect for delicate jobs such as car restoration, boat cleaning, and woodwork, where standard grit blasting could cause damage. In dry blasting mode, it performs like a traditional shot blasting or sand blasting system, tackling rust, paint, primer and contamination with ease. With a continuous blast time of around 40 minutes, the Aquablaster Xtreme 100 offers minimal downtime and maximum productivity.
Applied blasting pots are high-quality, Irish-made units built to a robust, long-life standard using 6mm European rolled steel - far superior to cheaper, thin-steel pots manufactured outside Europe.
Everything you need to know about support, pricing, shipping and leasing.
Leasing available
Mid-sized, versatile and powerful — the perfect sand blasting machine for longer jobs.
Power Rating: ⭐⭐⭐⭐
Blasting Time: Approx. 20 minutes continuous blast time
Airflow Required: Use our airflow and pressure calculator to see what size nozzle you can use
Buyers Guides: Read our handy guides on sandblasting machines and compressors
The Applied 40L Shot Blaster is a robust, portable sand blasting and grit blasting machine designed for professional use. With double the media capacity of the 20L model, it offers extended blasting time and efficiency, making it ideal for contractors and workshops handling shot blasting, sand blasting, and surface preparation on regular basis.
Fabricated from heavy gauge steel, this reliable blast pot delivers consistent performance across a wide range of applications including paint removal, rust treatment, surface cleaning and decorative blasting. Its size makes it a great all-rounder — large enough for demanding tasks but still mobile and easy to handle.
Applied blasting pots are high-quality, Irish-made units built to a robust, long-life standard using 6mm European rolled steel - far superior to cheaper, thin-steel pots manufactured outside Europe.
Everything you need to know about support, pricing, shipping and leasing.
Leasing available
Compact professional blasting with precise pressure control — ideal for restoration, paint removal, rust removal, wood, stone, metal and delicate surface preparation.
Power Rating: ⭐⭐
Air Consumption: Approx. 19.4 CFM / 550 L/min at 7 bar
Operating Pressure: Adjustable from 0.5 to 7.8 bar
Abrasive Capacity: 8 litres
Nozzle: 3 mm × 60 mm divergent tungsten carbide nozzle
Weight: Just 25 kg
Versions: Sabix 8 Base or Sabix 8 VR
The FEVI Sabix 8 is a compact professional sandblasting machine designed for jobs where control, portability and low air consumption are more important than maximum blasting power.
Its adjustable pressure makes it ideal for working across a wide variety of surfaces, from removing rust and coatings from metal through to controlled blasting of wood, stone, brick and other more delicate materials.
With an airflow requirement of only around 19.4 CFM at 7 bar, the Sabix 8 can operate from a much smaller compressor than conventional blast pots, creating a highly portable professional blasting setup.
Available in Base and VR configurations, the Sabix 8 can be specified for general blasting and restoration work or upgraded for greater abrasive control when using very fine media.
Which version do you need?
SABIX 8 BASE - GENERAL BLASTING & RESTORATION
The best choice for most general applications including rust removal, paint stripping, surface preparation, wood, stone and restoration work.
The Base combines adjustable blasting pressure with a compact 8 litre pot, remote-control blasting gun and abrasive regulation.
Ideal for:
Rust and corrosion removal
Paint and coating removal
Metal preparation
Wood restoration
Stone and brickwork
General restoration
Light to medium professional blasting
SABIX 8 VR - DELICATE RESTORATION & MICROBLASTING
The VR adds greater control over abrasive delivery, making it particularly suitable for delicate surfaces, conservation work and microblasting.
It includes a pneumatic tank vibrator to improve the flow of extra-fine abrasives together with a precision pneumatic abrasive mixing system.
Ideal for:
Conservation restoration
Delicate surfaces
Fine abrasive blasting
Microblasting
Architectural restoration
Stone and masonry
Detailed wood restoration
Not sure which version you need?
Tell us what you're blasting and we'll recommend the right Sabix 8, abrasive and compressor for the job.
Guide to Low-Pressure Sandblasting
Buyer’s Guide to Abrasives for SABIX 8 & Pressure Base
Everything you need to know about support, pricing, shipping and leasing.
Leasing available
Professional blasting with integrated abrasive recovery and dust extraction — ideal for workshops, maintenance, restoration and controlled blasting where keeping the surrounding area clean matters.
Power Rating: ⭐⭐⭐
Airflow Required: Approx. 25–71 CFM / 700–2,000 L/min at 7 bar
Operating Pressure: Adjustable from 2.5–7.8 bar
Abrasive Capacity: 24 litres
Nozzle: 4 mm tungsten carbide nozzle
Abrasive Recovery: Integrated cyclone recovery system
Vacuum: 1,500 W single-phase extraction unit
The FEVI Pressure Base is a professional pressure blasting machine with an integrated abrasive recovery and dust extraction system.
Instead of allowing abrasive and dust to spread around the working area, the blasting head works in contact with the surface. The surrounding brush helps contain the blast while the extraction system recovers the used abrasive and removed material.
A built-in cyclone then separates reusable abrasive from dust and waste, allowing suitable abrasive to be returned to the blasting system and used again.
This makes the Pressure Base particularly useful for workshops, factories, maintenance teams, restoration businesses and indoor environments where traditional open blasting would create excessive dust, abrasive and preparation work.
Why choose the Pressure Base?
Recover & reuse abrasive
The integrated recovery system collects abrasive as you blast.
A cyclone separates reusable abrasive from dust and removed material, helping reduce abrasive consumption and waste.
Greatly reduced dust & mess
The recovery head works directly against the surface while the vacuum simultaneously removes abrasive and dust.
This makes it particularly useful for indoor work and locations where containing conventional open blasting would be difficult.
Less area preparation
Because abrasive is recovered at the blasting head, significantly less screening and containment may be required compared with conventional free blasting.
Controlled local blasting
Ideal for treating specific areas rather than blasting an entire component or structure.
The operator can concentrate blasting on welds, corrosion, paint, coatings or individual areas requiring surface preparation.
Professional pressure blasting
Unlike simple suction recovery systems, the Pressure Base uses a 24 litre pressure blast pot to provide strong and consistent abrasive delivery.
Abrasive separation
The integrated cyclone separates reusable abrasive from fine dust and contamination before returning it to the system, helping maintain blasting performance and extend abrasive life.
Where does the recovery system work best?
The Pressure Base works best where the brush around the blasting head can maintain good contact with the surface.
Flat and gently curved surfaces are therefore particularly well suited to recovery blasting.
For highly irregular surfaces, complex shapes, corners or areas where the recovery head cannot seal effectively, the optional free-blast conversion kit allows the machine to be used as a conventional blasting system.
Buyer’s Guide to Abrasives for SABIX 8 & Pressure Base
What Is an Abrasive Recovery Blasting Machine?
Everything you need to know about support, pricing, shipping and leasing.
Get Your Machinery Ready
Remove rust & corrosion - Strip corrosion from machinery, implements, trailers and fabricated steel ready for repair or protection.
Remove paint & coatings - Remove old paint and stubborn coatings ready for refinishing.
Prepare for repainting - Create a clean, properly prepared surface for primers, protective coatings and new paint.
Wet or dry blasting - Choose traditional dry abrasive blasting or wet blasting where controlling airborne dust is important.
See Our Blasters in Action
“Spot on service from CoolBlast. The Aquablaster Xtreme’s ideal for paint and rust removal — real time-saver in the workshop.”
Jay @ DeeJay Truck Repairs
Choose your blasting machine
Aquablaster Xtreme 100 - Wet & dry blasting in one machine
A powerful professional blasting machine that lets you switch between wet and dry abrasive blasting.
Wet blasting helps suppress dust while delivering serious cleaning and surface preparation performance.
Ideal for: Machinery, trailers, implements, steelwork and larger restoration projects.
Applied 40 litre blast pot - Compact & versatile
A professional dry blasting machine for smaller and medium-sized maintenance jobs.
Easy to move around the workshop or yard while still delivering strong blasting performance.
Ideal for: Implements, components, repairs, smaller machinery and general maintenance.
Applied 100 litre blast pot - Built for bigger jobs
A high-capacity professional dry blasting machine designed for larger surface preparation and restoration work.
The larger pot gives longer blasting periods with fewer interruptions for refilling.
Ideal for: Larger machinery, trailers, implements, steelwork and regular blasting work.
Fevi Sabix 8 - Controlled blasting for smaller jobs
A compact low-pressure blasting machine ideal for more controlled maintenance and restoration work.
Its lower air requirement also makes it suitable where a large compressor isn't needed.
Ideal for: Components, wheels, brackets, smaller implements, localised rust and paint removal.
Fevi Pressure Base - Blast without the mess
Designed for localised surface preparation while recovering much of the abrasive and dust as you work.
A useful option for maintenance jobs inside workshops where keeping surrounding machinery and equipment cleaner matters.
Ideal for: Flat and accessible areas, localised corrosion, weld preparation, repairs and smaller restoration work.
Need the air to power it?
Portable compressors for blasting
Blasting needs the right combination of airflow and pressure.
CoolBlast supplies portable diesel compressors matched to your blasting machine, nozzle size and required working pressure.
We'll help you choose the right compressor without buying more capacity than you need.
Sand Blasting Packages
Leasing available
High Productivity. Wet or Dry Blasting. Ready for Professional Use.
Power Rating: ⭐⭐⭐⭐⭐
The Applied Aquablaster Xtreme 100 & Rotair MDVN 53 Package is a complete professional blasting solution designed for contractors who need maximum flexibility and productivity. Combining the Applied Aquablaster Xtreme 100 with the Rotair MDVN 53 compressor configured to 7 bar, this package delivers the optimum airflow for both wet and dry blasting. Whether you're removing coatings, preparing steel, restoring vehicles or carrying out dust-suppressed surface preparation, this package provides outstanding performance with minimal downtime.
Everything you need to know about support, pricing, shipping and leasing.
Leasing available
Compact. Professional. Built for Everyday Blasting
Power Rating: ⭐⭐⭐⭐
The Applied 40 Litre Shot Blasting Machine & Rotair MDVN 30 Package is a versatile blasting solution for contractors, workshops and maintenance teams requiring reliable on-site performance. Combining the robust Applied 40 Litre blast pot with the Rotair MDVN 30 Eco5 compressor, this package provides the airflow needed for a wide range of blasting applications, from rust and paint removal to steel preparation and restoration work. Designed for portability and productivity, it's an ideal all-round package for professional users.
Everything you need to know about support, pricing, shipping and leasing.
Leasing available
High Capacity. Maximum Productivity. Built for Professional Contractors
Power Rating: ⭐⭐⭐⭐⭐
The Applied 100 Litre Shot Blasting Machine & Rotair MDVN 53 Package is a high-performance blasting solution designed for contractors and industrial users who need extended blasting times and exceptional productivity. Combining the Applied 100 Litre blast pot with the Rotair MDVN 53 Eco5 compressor, this package delivers the ideal airflow for demanding surface preparation, rust removal and industrial cleaning applications. With around 40 minutes of continuous blasting before refilling, it's built to keep downtime to a minimum and productivity to a maximum.
Everything you need to know about support, pricing, shipping and leasing.
Leasing available
Maximum Airflow. Maximum Productivity. Built for the Toughest Blasting Jobs
Power Rating: ⭐⭐⭐⭐⭐
The Applied 140 Litre Shot Blasting Machine & Rotair MDVN 83 Package is designed for professional blasting contractors tackling the largest and most demanding surface preparation projects. Combining the Applied 140 Litre blast pot with the Rotair MDVN 83 Eco5 compressor, this package delivers an impressive 283 CFM at 7 bar, providing exceptional productivity for large nozzles and continuous blasting. Whether you're working on bridges, structural steel, marine projects or heavy industrial maintenance, this package is built to maximise output and minimise downtime.
Everything you need to know about support, pricing, shipping and leasing.
Not Sure What Machine You Need?
Tell us what you want to blast and we'll recommend the right machine, nozzle and compressor combination.
Why Buy From CoolBlast?
✔ Specialist blasting advice
✔ Compressor sizing expertise
✔ Complete blasting packages
✔ UK support
✔ Flexible finance
✔ Free UK mainland delivery
